Mixer

[psycho_fling]

is this a cheaper alternative to the v-tail mixer on technobots? i.e. is it suitable for a feather

http://cgi.ebay.co.uk/V-Tail-Mixer-less-than-7grams-Radio-Control-RC-Plane_W0QQitemZ170008808988QQihZ007QQcategoryZ1916 4QQtcZphotoQQssPageNameZWDVWQQrdZ1QQcmdZViewItemhttp://cgi.ebay.co.uk/V-Tail-Mixer-l...RC-Plane_W0QQi temZ170008808988QQihZ007QQcategoryZ19164QQtcZphoto QQssPageNameZWDVWQQrdZ1QQcmdZV iewItem

[josh]

Mixer

ye that will be fine just connect it as ur two speed contoller plugs to the rx and plug ur speedcontroller plugs into the 2 sockets on the v tail mixer

[jamesb]

Mixer

be aware that some vtails dont give you 100% turn rate.
this is to allow the plane they are meant to be in have some pitch control while rolling.
in a robot this mean you do not always get full turn rate, and in some cases not even full throttle.

double check this, unless this is a positive feature for your robot (can be in very fast/powerful robots that may turn too fast to control properly)

[psycho_fling]

Mixer

so what you are saying is, that it might make the robot not go as fast as it could and wont turn properly? how do we check?

thanks