CALEI -JAC

[billy breach]

Re: CALEI -JAC

design mod again.....

[plargen]

Re: CALEI -JAC

do you think that car seat actuator extend far enough to self right and be powerful enough to lift a robot, cos i got 1 for use in my bot but i dubious to if it will be strong enough

[billy breach]

Re: CALEI -JAC

well if it can lift me then i'm sure it'll lift the bots no problem. Right now it sits all the way down and its at the right height for my lifter, it travels around 100mm (if i mind correctly) and as its right at my hinge point then it should go up high enough to self- right (may need the help of a roller on the back).

[billy breach]

Re: CALEI -JAC

well i've started some of the wiring on the bot and cut the sides. starting to look like something.

[Gabe01]

Re: CALEI -JAC

This is looking really positive, how will you protect your wheels, can't wait to see the lifter.

[billy breach]

Re: CALEI -JAC

i was thiniing of placing a angle iron strip around it, this will also help should it get flipped onto its side.

[Gabe01]

Re: CALEI -JAC

Nice idea,

[billy breach]

Re: CALEI -JAC

well thats the lipo battery 18.5v ordered
2 x 30amp esc's ordered
1 x orange rx for the dx5 controller

[Gabe01]

Re: CALEI -JAC

Where did you order them from

[billy breach]

Re: CALEI -JAC

I go tto 30amp - ESC from here

http://www.electronize.co.uk/model_elec ... frames.htm

battery here

http://www.ebay.co.uk/itm/18-5v-5000mAh ... 8620005397

rx- orange fail safe on all channels here

http://www.ebay.co.uk/itm/Orange-Rx-7-C ... 3a6e4b2c22

[billy breach]

Re: CALEI -JAC

waiting on some batteries arriving then I can get the bot a test run and then work on the lifter......so the build is at a slow stage just now