Trax (My First Combat Robot)

[swanaldo]

Re: Trax (My First Combat Robot)

Trax is long time gone. I do still have the tracks but i cant really see me building another. Your welcome to the name no worries.

[Max]

Trax (My First Combat Robot)

Thanks for letting me use the name, just a quick update
I am back at school now and am waiting for a chance to finish off the welding, but I have just been told by the garage who are trying to get me another wiper motor that it may be better to get a electric window motor, I am sure I have heard of them being used before and was wondering which type people think will be better? And what are the differences between them?
Thanks
Max

[harry hills]

Re: Trax (My First Combat Robot)

well they are both useless and a bit out dated

[mattsdragons]

Re: Trax (My First Combat Robot)

if you want to go down that route then by all means do it. but, the £10 argos value drill motors would do a better job. beauty 2 (which has won the european championships, correct me if im wrong) uses the argos drill motors

[typhoon_driver]

Re: Trax (My First Combat Robot)

around 80 to 90 percent of featherweights use drills

[jonny]

Re: Trax (My First Combat Robot)

if you want to go down that route then by all means do it. but, the £10 argos value drill motors would do a better job. beauty 2 (which has won the european championships, correct me if im wrong) uses the argos drill motors

it used to use drills but i beleive it now uses speed 900's

[Max]

Re: Trax (My First Combat Robot)

Hi again,
I know that drill motors seem attractive but I have already designed and started building my robot around wiper motors and I don't think that drill motors will have the power I want when coupled to 150mm wheels and tracks! I also think that they will be to fast for the tracks making them liable to coming off and will make it hard to control.
As always I do have another question for those in the know, how early do you have to register for roaming robots events? I only wonder because I would like to enter the event at guilford but it looks like i will only just have enough time to finish the robot before then, so can I register before finishing my robot but be in risk of not having it done or can I wait till the last minute to enter?

[typhoon_driver]

Re: Trax (My First Combat Robot)

drill motors will happily move it. They have more power than wiper motors generally. Seriously drop the wipers and go for drills.

Generally it's ok to have a last minute submission but the best person to speak to is Jonno. Drop him a PM.

[Max]

Re: Trax (My First Combat Robot)

Just a quick update, my speed controller arrived today but have not had a chance to test it but I could not figure out how to connect it to my reciever, I see that on one side you plug in the battery and motor but don't know what the connectors on the other side are for (I guess they have something to do with the receiver). It is a sabertooth 2x25 so can someone please explain how to connect the reciever and what the other connectors are for?
Thanks
Max

[typhoon_driver]

Re: Trax (My First Combat Robot)

you are correct, those are to hook it up to the receiver. You need to pick up a servo plug cable (can clip one off a servo if you have it handy)

Otherwise

http://cgi.ebay.co.uk/500mm-Servo-Lead- ... 1e62efff76

Reading the instructions,

http://www.dimensionengineering.com/dat ... kStart.pdf

Seperate the wiring of the servo cable. Red goes into the 5v, black into the 0v and the white one into the S1 terminal. Plug it into receiver and off you go

[Max]

Re: Trax (My First Combat Robot)

But what goes in S2?

[psychostorm]

Re: Trax (My First Combat Robot)

But what goes in S2?

Signal 2 the second white wire that sends information from another channel on the RX.

You do want to move & steer, don't you?

[Max]

Re: Trax (My First Combat Robot)

Yes I do want steering as well, so do I have to plug two wires (one from each servo clip) into the 5v and 0v

[Max]

Re: Trax (My First Combat Robot)

Just been to see my design technology teacher and he said that two wiper motors will draw 60 amps which he said drill batteries cannot suppy, is he right? If he is what kind of batteries can supply that whilst not weighing more than 2 ( at a push two and a half) drill batteries ? Also if it draws 60amps in total then will a sabertooth 2x25 be able to handle it?

[ewan]

Re: Trax (My First Combat Robot)

No chance will they draw 60 amps, not unless you're significantly over-volting them! I'd /still/ go along with what seemingly everyone is saying, use drill motors if you can: you'll find there's far more support, information and spares available for them