Antweight Database

[AndrewHibberd]

Antweight Database

Will that be in action anytime soon Dave?

I didnt actually take it form the simpsons, but still i like the name

Will be improved greatly for the next time it fights

[jhq]

Antweight Database

name: Led 4.0
speed: WAY too fast
battery: 2S 340mAh Kokam lipo
drive: speedhacked futaba S148s
armor: 1&3mm polycarb, 0.2mm, 0.5mm and 1.4mm carbon fibre
status: almost finished

pic here: http://www.robosota.fi/index.php?sivu=robotit&robo_id=62&toiminto=robottihttp://www.robosota.fi/index.php?siv...iminto=robotti

[maddox]

Antweight Database

Malankaia Baba Yaga in action
http://home.hccnet.nl/h.bouwens/TEST.AVIhttp://home.hccnet.nl/h.bouwens/TEST.AVI

[RogueTwoRobots]

Antweight Database

In the words of Darth Vader; Impressive...most impressive

[erik_knutsson]

Antweight Database

Name:EL TORRO
Speed:SLOW!!
power:6v NiMH
Drive:futaba s3003
Amour:2 mm plexi
Status:almost finished

picture in my profile.

[flippt]

Antweight Database

Name: Desire
Speed: No idea what so ever
Power: 11,1V 300mAh (12 att fully charged)
Drive: Graupner C141
Weapon: FBS (Full Body Spinner)
Amour: Aluminium and 3mm lexan
Status: Building. Hope to get it ready for AWS20
Note: It is a walker and weights just over 120g!
http://i3.photobucket.com/albums/y89...efinished2.jpg

[razerdave]

Antweight Database

Name: Baby Hell
Speed: unknown
Power: 4.8v Ni-MH
Drive: 2 x GWS Pico servos
Weapons: axe
Armour: Moulded plastic (Tornado pullback chassis)
Status: building

Name: F.I.N (Four Inch Nails)
Speed: Unknown
Power: 4.8v Ni-MH
Drive: Naro HP/BB servos, speed hacked
Weapon: side-swiping double ended nails (FBS in effect)
Armour: 0.5mm - 2mm lexan (I think)
Status: Building

[josh]

Antweight Database

Name: Merge
Speed: fast
Power: 7.4 lipo
Drive: 2x sanyo 50:1 motrs with 2 scorpion minis
Weapons: ploughy wedgy thing
Armour: 3mm carbon finre and some o.5mm titanium
Status: finay

Name: Speedy
Speed: fast
Power: 7.4v lipo
Drive: 2 x JR s136l servos speedhacked and with a sozbots board for more control
Weapons: carbon fibre front plate
Armour: 1mm poly carb and 3mm carbon fibre

[craig_anto]

Antweight Database

Re Update of Anto XP1HP

Name:- Anto XP1HP
Speed:- 11.3m/s
Drive:- 2x modified Brushless Outrunner motors
Weapon:- shear speed, spin on the spot, electric tale to tilt front into the floor.
Armour:- 1mm titanium 4mm polycarb and 0.5mm spring steel
Status:- awaiting new Rx and will be finished

[luke]

Antweight Database

Wow. Sounds real impressive! I miss seeing so much of the old robot wars stuff and antweights and whatever else. I must get more involved in it all again!

[razerdave]

Antweight Database

Hi Guys. Well, for those who attended AWS 19, both my robots were built, but F.I.N and Baby Hell have undergone rebuilds:

F.I.N: shorter, allowing the thick armour to go right over, also allowing weight for side armour, switch has been taken out to allow more weight where required, and all the batteris now on top of the servos and under the receiver, and heavier nails, providing a more substantial flywheel effect.

Baby Hell: Everything is inside the robot now ! lol. I took off the problematic wheel guards and have 2mm polycarbonate offset from them, so no more rubbing. Plus, the axe has had its position changed, so it has a longer swing, may well change the head back to a screw, as the spike doesnt appear to do much

[duff]

Antweight Database

Well, Ive been doing ants for years now, so its about time I posted here.

Name: Duff
Speed: 1.5m/s
Power: 7.4v 360mah Li-po
Drive: GWS Park (speed hacked)
Weapon: Flipper, powered by GWS HPF X servo.
Amour: 1mm polycarbonate & carbon fiber.
Status: Active. Some slight mods needed for the next event.

Name: TNT
Speed: 0.8m/s
Power: 7.4v 140mah Li-po
Drive: 4 x 220 rpm motors
Weapon: None - pusher
Amour: None!
Status: About to be retired to make way for something more ambitious.

Name: Randar
Speed: 1 m/s
Power: 7.4v 360mah Li-po
Drive: Naro Max servo (speed hacked)
Weapon: 75mm diameter titanium disc spinning at 18,000 rpm
Weapon Motor: AirPower 300DF Brushless
Amour: 0.7mm Carbon Fiber.
Status: Active. Some new servos for the next event.

Name: The Nightmare of Milky Joe
Speed: 0.3m/s (Walker)
Power: 11.1v 360mah Li-po
Drive: GWS Park (speed hacked)
Weapon: 85mm diameter cutting disc spinning at 25,000 rpm
Weapon Motor: AirPower 300DF Brushless
Amour: 2mm polycarb.
Status: Being rebuilt so its more reliable.

Pictures in profile.

(Message edited by Duff on May 09, 2006)

[dgr]

Antweight Database

Ive built way too many ants to post em all up. But people can see all mine by going to http://www.buildersdb.comwww.buildersdb.com and searching team name Die Gracefully Robotics if theyre interested.

[duff]

Antweight Database

Jesus! Dave? 44 results returned?!

[dgr]

Antweight Database

Yup, sounds about right. lol. Cept one of them is the feather of course. :wink: